Insta360 Titan, User Manual

Page: 54 / 250

Click to enter shooting mode, the app will automatically load preview stream and get ready to shoot a er completion.
The interface of the photo shooting mode is shown below. There are several buttons at the bottom of the preview screen.
The buttons from le to right are:
① Gyroscope for stabilization: with the function on, photos stored through the camera’s real-time stitching function can
be automatically corrected according to gyroscope data. Note that this feature cannot take effect when recording 3D real-
time stitching content or 3D live-streaming.
② VR preview button: tap the button to switch to preview under VR glasses mode.
③ Full screen: tap the button to watch the preview stream in full screen.
④ Brightness histogram: with the button on, a brightness histogram of the preview stream will be shown on the top le
of the preview screen. When shooting under sunlight, it’s hard to just check the exposure with your eyes on the preview
screen. Brightness histogram can help you to get the proper exposure.
⑤ Audio button: tap the button to turn on or off the sound in the preview stream. Note that this function only takes
effect in the preview screen and doesn’t affect the sound recording settings in the camera.
⑥ Close preview button: press it to close the preview screen. It can save electricity when the preview screen is closed.
You can tap anywhere in the preview screen to turn on the preview function again.