Insta360 Titan, User Manual

Page: 21 / 250

5. Turn on the receiver, and connect the phone / iPad to the receiver through USB cable. Take iOS as an example. Wait
about 15 seconds or so, the phone / iPad settings (generally in the system settings menu) will show "Ethernet"
option, click to enter the interface of Ethernet settings. Set "conFig. IP" to automatic, and confirm whether the IP
address is also 192.168.100.XXX. In most Android devices, there is no "Ethernet" option. The set-up is ready a er
connecting your devices to the receiver via USB cable. (please refer to the Compatibility List below for the supported
Android devices)
If there is no required IP available a er waiting for a while, replug the USB cable and reconnect until the desired IP
address is displayed.
If you want to connect the receiver to your computer, please use a network cable to connect. A er connecting, set the
computer network to DHCP, which can automatically obtain the IP address assigned by the receiver.