27
Chapter 4 Integrated RAID System
The executable menus of the configuration interface of SATA RAID are the fol
-
lowing four:
● Create RAID Volume
Create RAID Volume.
● Delete RAID Volume
Delete the existing RAID Volume.
● Reset Disks to Non-RAID
Reset the HDD in the RAID volume, and restore the HDD to non-RAID status.
● Exit
Exit the configuration interface of SATA RAID.
Ⅰ
.
Create RAID Volume Menu
After entering the configuration interface of SATA RAID, you can select the menu
with up and down arrow keys, and then press [Enter] to create RAID volume menu. Or
simply input the digital key before the menu to Create RAID menu.
The system will display the following menu options:
Name: Please input the volume name, which contains less than 16 characters
without special characters.
RAID Level: Please select RAID volume level; if it has not created volume at
present, there are four volume levels for selection, namely, RAID0 (Stripe), RAID1
(Mirror), RAID10 (RAID0+1) and RAID5 (Parity), and please select the levels based
on the actual demand.
RAID0: it allows 2 or more than two hard disks to create this RAID volume.
RAID1: it allows two hard disks to create this RAID volume.
