manualshive.com logo in svg

Inspur Yingxin NX 5440, Manual, Page: 26 / 43

Share
Download
Inspur Yingxin NX 5440 Manual Download Page 26

17

Chapter 2 System BIOS 

amendments you made in the BIOS Setup. And you will not exit the BIOS Setup. 

●

 

Discard Changes

Select this item and press [Enter]. Then select [Yes] in the pop-up, and discard the 

amendments you made in the BIOS Setup. And you will not exit the BIOS Setup. 

●

 

Restore Defaults

Select this item and press [Enter]. Then select [Yes] in the pop-up, and the system 

will load the default optimized settings. You will not exit the BIOS Setup. Also, you 
can realize this function by [F9].

●

 

Save as User Defaults

Select this item and press [Enter]. Then select [Yes] in the pop-up, and all BIOS 

settings will be saved as the default configurations. 

●

 

Restore User Defaults

Select this item and press [Enter]. Then select [Yes] in the pop-up, and the system 

will load the default settings. 

●

 

Boot Override

Select the device item in this menu and press [Enter] to confirm. Then the system 

will boot from the selected device. 

Summary of Contents for Yingxin NX 5440












































Reviews:

No comments