Inspur NF5288M5 User Manual Download

Page: 80 / 114

●

The name of the Web interface is displayed on top left of the interface.

●

The meanings of all buttons on top right of the interface:

◇

Click on the Overview button, to return to the overview page.

◇

Click on the Refresh button, to refresh the page.

◇

Click on the UID button, to turn on/off the UID LED.

◇

Click on the Power button, to turn on/off the server.

◇

Click on the Language button, to change the language (which supports Chinese

and English).

◇

Click on the Help button to query help information on the corresponding page.

◇

Click on the Logout button, to return to the login page.

●

The navigation tree is on the left. Via the nodes on the tree, you can select different

functional interfaces. The following functions are included:

•

View the overall situation

•

View system information

•

Remote control

•

Power management

•

Event and log query

•

Real-time monitoring

•

Diagnosis and orientation

•

System maintenance

•

System configuration

For detailed introduction on all functions, please refer to the following chapters.

Summary of Contents for NF5288M5



















































































































Search results

Summary of Contents for NF5288M5

Reviews:

Related manuals for NF5288M5

Brands by name

Popular brands

Inspur NF5288M5, User Manual

Search results

Summary of Contents for NF5288M5

Reviews:

Related manuals for NF5288M5

Brands by name

Popular brands