manualshive.com logo in svg

Inspur NF5288M5, User Manual

Share
Download
Inspur NF5288M5 User Manual Download Page 77

 71

BMC Settings 

and achieve management system login with domain accounts.

8.2 Functional Modules

This chapter introduces the Inspur Server Management System module composition, as well 
as the functions of these modules.

8.2.1 Module Composition

The Inspur Server Management System is mainly composed of IPMI module, command line 
module, WEB module, KVM Over IP and virtual media.

●

 The command line module attains the calling of IPMI module. The user performs the 

operation on IPMI module via command lines.

●

 The WEB module attains daily management on server in the form of visual interface 

via calling IPMI commands, and the WEB module integrates functions of KVM and virtual 

media.

8.2.2 IPMI Module Introduction

IPMI module attains management of the server system according to the IPMI2.0 standard.
The functions of the IPMI module include:

●

 System real-time monitoring

Provides the alarm report and alarm indication in the event of fault detection.

●

 System remote control

Meets the management requirements such as remote power-on/off, and business system 

reset via command lines and Web.

8.2.3 Command Line Function Introduction

The command line module includes query and setting commands for network, sensor, fan, 

user management, system and server.

8.2.4 Remote Control Module Introduction

The remote control module includes:

●

 KVM Over IP: A management method that carries out monitoring and control on remote 

devices via local video, keyboard and mouse to the client, enabling the operation of remote 
devices in real-time.

● 

Virtual Media: A method of providing remote access on local media (CD-ROM, floppy drive 

or CD/floppy disk iso file) in the form of virtual CD driver and floppy drive on server via the 

internet.

Summary of Contents for NF5288M5



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands