manualshive.com logo in svg

Inspur NF5280M5, User Manual

The Inspur NF5280M5 Security Configuration Manual is a comprehensive user manual designed to guide users in configuring and optimizing the security features of this high-performance product. Easily accessible, this manual can be downloaded for free from our website, ensuring a seamless user experience.

Share
Download
background image

BMC Settings 

 165

Step 3

Check image version and current image version, then click “Proceed to Update” button to 

start update.

Wait for about 15 mins (both images), then flash is complete.

Figure 9-5

5 

BMC Update Step 3

9.23.1.4 SOC Flash Update

SOCflash tool will directly erase and overwrite flash with new image without Firmware 
Integrity Checking. All configuration will be erased.

For security, we disable High-performance Bus (AHB) bridges by default, you cannot 
arbitrarily read and write access to the BMC’s physical address space from the host, and 
SOCflash is disabled. If you want to enable SOCflash, you should enable High-performance 
Bus (AHB) bridges, please contact our support staff to get the method. We strongly don’t 
suggest customer to use SOCflash tool for security.

To update BMC in Windows/Linux/DOS, enter DOS or Linux shell or Windows cmd line, 
execute the following CMDs:
socflash if=Imagefile will update the Image1; 
socflash if=Imagefile  offset=0x2000000 will update the Image2.

9.23.2 BIOS Firmware Update

BMC supports BIOS Firmware update via the Management Web GUI.

Intel ME firmware is packaged with BIOS firmware as a single firmware image.

●

Support two upgrade modes: “BIOS+ME” and “BIOS Only”.

●

Power off the system before performing BIOS firmware update.

●

After BIOS firmware update, BIOS NVRAM will be cleared, all BIOS configuration will be

Summary of Contents for NF5280M5









































































































































































































Reviews:

No comments

Related manuals for NF5280M5

Supermicro SuperServer E100-8Q User Manual preview
SuperServer E100-8Q
Brand: Supermicro Pages: 48
G-Technology G-SPEED FC Product Manual preview
G-SPEED FC
Brand: G-Technology Pages: 17
C-Data CR200-1432R-B User Manual preview
CR200-1432R-B
Brand: C-Data Pages: 26
Netis DL4305 Quick Installation Manual preview
DL4305
Brand: Netis Pages: 16
IBM HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006 Supplementary Manual preview
HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006
Brand: IBM Pages: 1
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
Convex CSMD2-B440 User Manual preview
CSMD2-B440
Brand: Convex Pages: 19
Zoom Realtek Series User Manual preview
Realtek Series
Brand: Zoom Pages: 31
Seagate ST94015A Product Manual preview
ST94015A
Brand: Seagate Pages: 46
EMC SVR-I2U-R2312 Installation And Maintenance Manual preview
SVR-I2U-R2312
Brand: EMC Pages: 34
AMX NXA-WC80211G-CF Installation Manual preview
NXA-WC80211G-CF
Brand: AMX Pages: 6
Calix GigaSpire BLAST u4hm Installation Manual preview
GigaSpire BLAST u4hm
Brand: Calix Pages: 45
IBM 7944E2U User Manual preview
7944E2U
Brand: IBM Pages: 21
ulsonix DOUBLE BIN ULX-240-1 User Manual preview
DOUBLE BIN ULX-240-1
Brand: ulsonix Pages: 9
IBM 8668 - Eserver xSeries 232 Hardware Maintenance Manual preview
8668 - Eserver xSeries 232
Brand: IBM Pages: 182
Motorola solutions avigilon NVR4 Series Installation Manual preview
avigilon NVR4 Series
Brand: Motorola solutions Pages: 18
Olive O3HD Quick Start Manual preview
O3HD
Brand: Olive Pages: 103
Oracle StorageTek SL8500 Safety And Compliance Manual preview
StorageTek SL8500
Brand: Oracle Pages: 59

Brands by name

Popular brands

Load more brands