23
Chapter Three System Setup
Chapter Three System Setup
guide system from equipment selected.
3.2 Mainboard Jumper Setting
Mainboard jumper setting is to short circuit two pins of the jumper to change
interface function, see the following
fi
gure, so as to adjust mainboard functions.
Jumper Setting Figure
3.2.1 Open Case Top Panel
If the following operation is required, please obtain authorization of Inspur Group
Co., Ltd.
fi
rst, open top panel of the case, detailed steps are as follows:
1. Shut down the system (disconnect AC power cable);
2. Loosen two bolts at the back of case top panel;
3. Vertically press down card slots on case top panel with two thumbs, and push
top panel towards back of the machine.
4. Remove case top panel.
Open Case Top Panel
