manualshive.com logo in svg

Inspur NE5260M5, User Manual, Page: 70 / 135

Share
Download
Inspur NE5260M5 User Manual Download Page 70

64

DCU Streamer Prefetcher

DCU streamer prefetcher on-off settings. Options include:

Enabled

Disabled

This function can prefetch CPU data to shorten the data 

reading time.

Enabled

DCU IP Prefectcher

DCU IP prefectcher on-off settings. Options include:

Enabled

Disabled

This function can judge whether there is data to prefetch, 

to shorten the data reading time.

Enabled

LLC Prefetcher

All threads LLC prefetcher on-off settings. Options 

include:

Enabled

Disabled 

Disabled

DCU Mode

DCU mode settings. Options include:

32KB 8Way Without ECC

16KB 4Way With ECC

32KB 8Way 

Without ECC

Extended APIC

Extended APIC on-off settings. Options include:

Enabled

Disabled

Enabled

AES-NI

AESinstruction on-off settings. Options include:

Enabled

Disabled

This menu mainly controls whether the CPU supports 

AES instruction. These instructions are mainly used for 

system virtualization. Enable this instruction, system 

performance will be improved.

Enabled

8.2.4.2 Common Configuration

Common Configuration interface is used to set the common options.

Summary of Contents for NE5260M5








































































































































Reviews:

No comments