Insportline TA-7710, User Manual

Page: 62 / 96

62
Never pour any liquids on any part of the treadmill and keep the treadmill dry completely before using.
“ O
PERATION
I
NSTRUCTIONS ”
L
UBRICATION INSTRUCTIONS – EVERY 150 HOURS or 2000 KM / 1,250 MILES
k. It is necessary to lubricate your running deck every 150 hours or
2000KM/ 1,250MILES to maintain optimal performance.
l. Once the treadmill workout time reaches to 150 hours or 2000KM/
1,250MILES, the console will display the scrolling message
“
LUBRICATE DECK HOLD TO CLEAR
”. NOTE: The
treadmill will not operate while the message is showing. To
suspend/clear the message, hold the “MODE” key for 5
seconds.
m. Start performing the lubrication procedure.
n. Insert the spray nozzle (B) into the spray head of the lubricant
can (A) .
o. While lifting the side of the running belt (12) , gently position the
spray nozzle between the running belt and the running deck from
the front of the treadmill.
p. Spray the lubricant to the running deck, moving from the front of the
treadmill to the rear.
q. Repeat the above procedure on the other side of the belt.
r. Then runs the treadmill without anyone on it at 10~12
kph (6~7 mph) for at least 2~3 minutes to let the
lubricant spread evenly across the running deck and
underside of the running belt.
s. Check the running belt whether is off-center or slips,
if it does, go to page 9~10 to center the belt or adjust
the belt tightness until the running belt has been
tightened properly.
t. Plug in the power cord and insert the safety key to
start using the treadmill.