Insportline TA-7710, User Manual, Page: 60 / 96

60
can damage the treadmill.
6. Plug in the power cord, insert the key and walk on the treadmill
at low speed (around 2 kph/1mph) to determine if the belt is still
slipping. If the belt is still slipping, repeat the above procedure
until the walking belt has been tightened properly.
“ O
PERATION
I
NSTRUCTIONS ”
S
AFETY KEY & EMERGENCY BUTTON
f. This treadmill will not start unless both of the Safety Key (A) and
Emergency Button (B) are placed/located in position.
(Release the Emergency Button (B) to the normal position by
turning it clockwise.)
g. Always attach the Safety Key (A) securely to your clothing when
using the treadmill.
h. The Safety Key and Emergency Button are designed to cut the
power off if the safety key is disengaged from the console or the
emergency button is pressed down.
i. After workout, pull off the safety key and keep it well when you
do not use the machine.
j. If the Main Power Switch is on, but the safety key isn’t placed in
position or the emergency button is pressed down, t he console
will display the scrolling message “
PLEASE INSTALL
SAFETY KEY TO START
”. To suspend/clear the message,
place the safety key in the right position and release the
emergency button by turning it clockwise.
L
EVELING
h. Before using the unit, make sure it’s level.
i. Place a Bubble Level (A) on the running belt to see if the treadmill is level.
If the treadmill needs leveling, continue to step. 2.
j. 2 pcs Levelers (146) are located on the rear side of the treadmill.
k. Locate yourself next to the side that needs to adjust the leveler (146) .
l. Ask a capable assistant to lift the rear portion of the treadmill (using proper
lifting techniques).
m. Level the treadmill by adjusting the Leveler (146) . Adjust one leveler (146)
at a time.
n. Recheck the level of the treadmill with the Bubble Level (A) on the running
belt after each adjustment until the treadmill is level.