![background image](http://html1.mh-extra.com/html/insportline/in-7845/in-7845_user-manual_2068979009.webp)
9
ASSEMBLY INSTRUCTIONS
STEP 1: Front and Rear Stabilizers Installation
Position the Front Stabilizer (14) in front of Main Frame (1) and align bolt holes. Attach the Front Stabilizer (14)
onto the front curve of the Main Frame (1) with two M8x70 Bolts (61), two Ø8xØ25 Big Curve Washers (62),
and two M8 Cap Nuts (63).
Position the Rear Stabilizer (15) behind the Main Frame (1) and align bolt holes. Attach the Rear Stabilizer (15)
onto the rear curve of the Main Frame (1) with two M8x70 Bolts (61), two Ø8xØ25 Big Curve Washers (62),
and two M8 Cap Nuts (63). Tighten cap nuts with the Multi Hex Tool provided.
STEP 2: Front Post and Tension Control Knob Installation
Remove six M8x15 Bolts (91), six Ø20xØ8x2.0 Big Curve Washers (43), from the Main Frame (1). Remove
bolts and washers with the S6 Allen Wrench provided.
Insert the Tension Cable (84) through into the bottom hole of Front Post (2) and pull it out from the square hole
of Front Post (2).
Connect the Sensor Wire II (78) from the Main Frame (1) to the Sensor Wire I (92) from the Front Post (2).