![background image](http://html1.mh-extra.com/html/insportline/in-7845/in-7845_user-manual_2068979012.webp)
12
Remove four M5x12 Bolts (97) from the back of the Computer (96). Remove bolts with the Multi Hex Tool
with Phillips Screwdriver provided.
Remove two M8x15 Bolts (91) and two Ø8xØ16x1.5 Curve Washers (13) from the Front Post (2). Remove
bolts and curve washers with the S6 Allen Wrench provided.
Insert the Hand Pulse Sensor Wires (22) from the Handlebar (7) into the hole on the Front Post (2) and then pull
them out from the top end of the Front Post (2).
Attach the Handlebar (7) onto the Front Post (2) with two M8x15 Bolts (91) and two Ø8xØ16x1.5 Curve
Washers (13) that were removed. Tighten bolts and curve washers with the S6 Allen Wrench provided.
Connect the Sensor Wire I (92) and Hand Pulse Sensor Wires (22) to the wires that come from the Computer
(96) and then attach the Computer (96) onto the top end of the Front Post (2) with four M5x12 Bolts (97) that
were removed. Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
OPERATING THE COMPUTER
SPECIFICATIONS
TIME
0:00 - 99:59 MIN:SEC
SPEED
0.0 – 999.9 KM/H or ML/H
DISTANCE
0.00 – 99.99 KM or ML
CALORIES
0.0 – 999.9 KCAL
TOTAL/ODOMETER
0.00 – 99.99 KM or ML
PULSE
40 - 200 BEATS/MIN
KEY FUNCTION
MODE: To select the function you want. Hold the key for 4 seconds to have all function values reset except the
TOTAL.
SET: To input the target value.
RESET: To let the value reset.
OPERATION PROCEDURES
AUTO ON/OFF .The monitor will be automatically shut off if there is no signal coming in for 4 minutes. The
monitor will be auto-powered when start exercise or press the key.
FUNCTION
1.
TIME (TMR): Auto-memorize the workout time while exercising.
2.
SPEED (SPD): Display the current speed.