22
Please make sure that the plug has been pulled out before cleaning or maintenance.
Depositing
The treadmill should be deposited indoor in case of being damp. Water can’t be spattered and nothing can be laid
and inserted on the treadmill.
Please keep the air a little humid in winter. And please void the big static electricity, it may disturb the operation
of meters or even damage them.
GUIDES FOR MALFUNCTION
Analyzing and eliminating malfunction
Item.
Malfunction
Reasons
Solution
1
Treadmill can’t be
started
The safe key isn’t in the
right position
Put the safe key in the right position
The electrical switch is
placed to “0”
Turn the electrical switch to “1”
2
Meter can’t display
The meter and upper
communication line are not
connected well
Disassembly meter and check the upper
communication line, make sure that meter and
communication line are connected well.
The upper communication is
broken
Replace it!
3
Heart rate can’t be
displayed
The pole of heart rate sensor
is not wet enough
Wet the pole with water or liquor for hard
contact lenses
Disturbed by
electromagnetism
Stay away from electromagnetism
4
Incline doesn’t work
The motor wire is not well
connected
Open the motor cover and reconnect it
5
Running belt runs
faster or slower than
what has been
displayed
Unadjusted
Readjust it
6
Running belt slips
Running belt is not tight
enough
Please read “Maintenance: The adjustment
steps for poly V-belt / Adjustment running
belt“
7
Running belt is
deflected
The running belt is
unadjusted.
Please read “Maintenance: The adjustment
steps for running belt deflection”
8
Displayed E0 on the
screen
No safety key signal
If safety key on machine, then check the
connecting part and make sure safety key are
connected well. Otherwise, replace it!
9
Displayed E01 on the
screen
No sensor signal
Check sensor wire, whether it is been
connected well or whether it is broken.
10
Displayed E02 on the
screen
The trouble of PCB
IGBT-CE open circuit, replace PCB.
11
Displayed E03 on the
screen
Big fluctuated speed
If this problem happened when speed is
bigger than 8km/h, then the reason is
overload and running belt is broken or lack of
oil.
If the motor has been used for a long time,
then replace the motor. Otherwise, replace the