20
F-1
SEX
MAN
WOMAN
F-2
AGE
10------99
F-3
HEIGHT
100----220
F-4
WEIGHT
20-----150
P
BODYFAT
≤19
Underweight
BODYFAT
=(20---25)
Normal weight
BODYFAT
=(25---29)
Overweight
BODYFAT
≥30
Obesity
POWER SAVE MODE
Our machine has power save function. When you turn on power switch for 10 minutes and don’t press any key,
the machine will come into power save mode and there is no light on the screen. You could press any key into
ready condition.
MAINTENANCE
Identification ways for the degree of tightness of running belt and poly V-belt:
When the running belt skips, please follow the steps as follows to make sure which belt needs to be adjusted,
running belt or poly V-belt.
a)
Unplug all power supply, screw and remove the Base cover.
b)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the
running belt stop. If running belt stops, together with the front roll, but the motor still runs, under this
condition, it means the poly V-belt needs to be adjusted.
c)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to make the
running belt stop. If running belt stops, but front roll still runs, under this condition, it means the
running belt needs to be adjusted.
The adjustment steps for poly V-belt:
a)
Unplug all power supply and take off the base cover.
b)
Loosen the four screws for the motor, adjust the V-belt tension bolts in clockwise direction, and then
tighten back the four screws for the motor.
Adjustment running belt:
a)
Turn the speed to be 6km/h. for running
b)
Turn the both tension screws located at the end of the treadmill on the right and left sides, half a turn
clockwise using the Allen key. (Diagram1 and Diagram 2)
c)
After adjustment, running belt still slips; please repeat the steps as above.
Tighten the running belt (Diagram 1)
Loosen the running belt (Diagram 2)
The adjustment steps for running belt deflection:
The running belt will be deflected more or less under using. Then it needs to be adjusted. The steps are as
follows: