Assembly Instructions
A s s e m b l y S t e p 4
A.) Foam Roller Assembly
Slide the two
Foam Rollers (#20)
onto the
Adjustable Ankle Brace (#04)
and another two on
the
Ankle Brace Tube (#12)
. Apply soapy water to
the tubes if the foam rollers do not slide on easily.
B.) Adjustable Foot Tube Assembly
Remove the
Knob Bolt
(#23)
from the
Height Adjustment Tube (#05A)
and set it
aside. Slide the
Adjustable Foot Tube (#08)
in the
Height
Adjustment Tube (#05A)
and secure it with the
Knob Bolt
(#23)
.
The Adjustable Foot Tube (#08)
is designed to accommodate
different shoe sizes by moving up for smaller feet and down
for larger feet. Please adjust it to accommodate your foot size
accordingly before inverting
(ALWAYS WEAR ATHLETIC
SHOES BEFORE INVERTING)
.
C.) Height Adjustment Tube Assembly
With the help
of an assistant, attach the
Height Adjustment Tube
(#05A)
to the
Backrest Frame (#07B)
by pulling the
Height Selector Lock Pin (#19)
out and simultaneously
sliding the
Height Adjustment Tube (#05A)
in.
Release the
Height Selector Lock Pin (#19)
at any
setting for now. Please note, the
Height Adjustment
Tube (#05A)
is designed to accommodate the height of
various users; set it accordingly by pulling the
Height
Selector Lock Pin (#19)
as you slide the
Height
Adjustment Tube (#05A)
up or down. The assembly
process is now complete. Please read the rest
of the manual to learn about the safety features and
operation procedures.
05A
05A
A
23
08
B
D.) Plastic Clip Footing Assembly
Ensure that
two
Plastic Clip (#17)
footing is installed on the
Front Leg Tube (#01)
and
Rear Base (#03$)
before using the unit.
If for any reason they are not installed on the
unit, follow these simple steps to install them. First,
lift the front end up and you will notice that there is a
hole on the bottom. Insert the clip pin on the
Plastic
Clip (#17)
into the hole on the
Front Leg Tube (#01)
and snap it into place. Repeat this process to the
Rear Base (#03$)
if neccessary.
C
01
03A
17
17
D
