18.
At this stage the trampoline should like the picture showed.
19.
With stitching portion facing down, lay bounce mat inside frame and attach a spring in to one of
triangle rings on the mat. Then attach the other end of the spring to the frame.
20.
Repeat step 6 directly across from where you attach the first spring. Then attach two more springs
half distance between the first two springs, directly across from each other. This will ensure equal
tension is distributed between the springs.
21.
Repeat process for the remaining springs. Use the spring tool, as shown above.
Warning: During spring assembly, please be careful where you place your hand and other parts of
you body as connector points and springs become locations.