TESTING THE TRAMPOLINE
After you have assembled the trampoline it is important that you perform the following safety checks:
Using the tools provide please ensure that all nuts and bolts are tightly in place do not over tighten.
Check underneath the trampoline to ensure that all the springs are hooked on securely to the frame.
Check that the floor is even and the trampoline does not move and is firmly on the ground.
Check that the spring pad is completely covering the springs and outer circle of the trampoline frame.
SAFTEY ENCLOSURE:
Check all the upright poles on the enclosure to ensure that they are locked in to place securely.
Check the netting to ensure that during assembly there is not tears in the netting prior to use.
Checking the zipper and entrance of Net functions properly.
Ensure that all the hooks are attached to the springs “V” rings securely.
Once all the checks have been performed and the trampoline has passed all the initial assembly checks
you can then proceed to check the stability of the trampoline. One person must get on the trampoline
and bounce in the centre for approximately 5 minutes to ensure that the trampoline is sturdy and has
been placed on a suitable location, if the trampoline is unsteady you will need 4 persons to move the
trampoline to a more suitable location and repeat the checks again until everything secure and sturdy.
Please remember to follow the safe user guide at all times and enjoy lots of fun with your new
trampoline.