background image

28 

 

The seller is SEVEN SPORT s.r.o. with its registered office in 

Strakonická street 1151/2c, Prague 150 

00,  Company  Registration  Number:  26847264,  registered  in  the  Trade  Register  at Regional  Court  in 
Prague, Section C, Insert No. 116888. 

According to valid legal regulations it depends whether the Buyer is the End Customer or not. 

“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not 
conclude and execute the Contract in order to run or promote his own trade or business activities. 

“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the 
purpose  of  using  the  Goods  or  services  for  his  own  business  activities.  The  Buyer  conforms  to  the 
General Purchase Agreement and business conditions. 

These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement 
made  between  the  Seller  and  the  Buyer.  All  Warranty  Conditions  are  valid  and  binding,  unless 
otherwise  specified  in  the  Purchase  Agreement,  in  the  Amendment  to  this  Contract  or  in  another 
written agreement. 

Warranty Conditions 

Warranty Period 

The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in 
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal 
warranty period provided to the Consumer is not affected. 

By  the  Warranty  for  Goods  Quality,  the  Seller  guarantees  that  the  delivered  Goods  shall  be,  for  a 
certain  period  of  time,  suitable  for  regular  or  contracted  use,  and  that  the  Goods  shall  maintain  its 
regular or contracted features. 

Batteries 

6-month battery warranty 

– we guarantee that battery's nominal capacity does not fall below 70% of its 

total capacity within 6 months of the product

’s sale. 

The Warranty does not cover defects resulting from (if applicable): 

 

User’s  fault,  i.e.  product  damage  caused  by  unqualified  repair  work,  improper  assembly, 

insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks 

 

Improper maintenance 

 

Mechanical damages 

 

Regular use (e.g. wearing out of rubber and plastic parts, moving mechanisms, joints, wear of 

brake pads/blocks, chain, tires, cassette/multi wheel etc.) 

 

Unavoidable event, natural disaster 

 

Adjustments made by unqualified person 

 

Improper  maintenance,  improper  placement,  damages  caused  by  low  or  high  temperature, 

water, inappropriate pressure, shocks, intentional changes in design or construction etc. 

Warranty Claim Procedure 

The  Buyer  is  obliged  to  check  the  Goods  delivered  by  the  Seller  immediately  after  taking  the 
responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must check 
the Goods so that he discovers all the defects that can be discovered by such check.

  

When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase 
and validity of the claim 

by the Invoice or Bill of Delivery that includes the product’s serial number, or 

eventually by the documents without the serial number. If the Buyer does not prove the validity of the 
Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim. 

If  the  Buyer  gives  notice  of  a  defect  that  is  not  covered  by  the  Warranty  (e.g.  in  the  case  that  the 
Warranty Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller 
is  eligible  to  require  a  compensation  for  all  the  costs  arising  from  the  repair.  The  cost  shall  be 
calculated according to the valid price list of services and transport costs. 

Summary of Contents for IN 24097






























Reviews: