background image

12 

 

CONSOLE 

 

Display 

TIME  

Range: 0:00 - 18:00, after reaching the maximum value the program will not stop, 
the time will start counting from 0:00. 

Countdown  mode,  range:  99  min  -  0.00,  after  reaching  0.00  TIME  the  display 
shows END, after 5 seconds the console switches to standby mode. The time and 
tempo display changes every 5 seconds. 

DISTANCE  

Range: 0.00 - 99.99, after reaching the maximum value the program will not stop, 
the distance will start counting from 0:00. 

In  countdown  mode,  the  distance  will  be  subtracted  from  the  set  value  down  to 
0.00.  after  reaching  0.00  the  display  shows  END,  after  5  seconds  the  console 
switches to standby mode. 

In FAT test mode, the display shows the measured value. 

PACE  

Shows how long it takes to run 1 km. Units: min / km 

CALORIES  

Displays  calories  burned.  Calories  are  displayed  in  the  range  0.0  -  999.  After 
reaching  the  maximum  value,  the  program  will  not  stop,  the  value  will  start 
counting from 0. 

In countdown  mode,  the  value  will  be  subtracted  from  the  set value  down  to  0.0. 
The display then shows END, after 5 seconds it switches to standby mode. 

PULSE  

Displays the current pulse. Hold both sensors for 5 seconds to measure your heart 
rate; range: 5 0-200 beats per minute. The data is for guidance only. 

INCLINE  

Displays the current incline level. Range 1 - 15. In climb mode, the range is from 1 
- 40. 

SPEED  

Displays the current speed. Range 0.8 - 18 km / h. In climb mode, the range is 0.8 
- 6 km / h. 

STEPS  

Displays the number of steps 0 - 99999. The value is not displayed in climb mode. 

LCD display 

The  display  shows  the  values  of  time,  distance,  speed,  calories,  and  heart  rate 
when you press the DISPLAY-ALT button. 

The display shows the measured fat values in FAT mode. 

 

Summary of Contents for IN 24097






























Reviews: