background image

13 

 

BUTTONS 

START 

If  the  device  is  plugged  in  and  the  safety  key  is  inserted,  press  the  button  to 
turn on the treadmill 

STOP 

During operation, pressing the button stops all operations and the data returns 
to the default values. 

MODE 

In standby mode, select a program: time countdown 30:00, distance countdown 
mode 1.0, calorie countdown mode 50.0, step countdown mode 5000. 

The function will flash during selection. 

Use the SPEED +/-, I/- buttons to adjust the values, press START to 
start the program. 

PROGRAM 

Press  the  button  to  select  the  preset  program  P1  -  P12,  FAT.  (P1  -  manual 
program, P2 - interval program, P3 weight loss program, P4 - walking). 

In climb mode, you can select programs P1 - P6. 

QUICK PROGRAM 

BUTTONS 

You  can  select:  P1  -  manual  program,  P2  -  interval  program,  P3  weight  loss 
program, P4 - walk, P5 - run, P6 - climb. 

RUN 

In standby mode, press the button to enter run mode, it does not work in climb 
mode. 

CLIMB 

In standby mode, press the button to enter the climb mode, it does not work in 
run mode. 

-SPEED+ 

In settings  you  can  adjust  the  values,  during  operation  you  change  the  speed 
by 0.1 km / h. By holding down the button, the value will change gradually. 

In  settings  you  can  adjust  the  values,  during  operation  you  change  incline  by 
0.5. By holding down the button, the value will change gradually. 

SPEED 6,8,10 

Quick speed selection button 6, 8, 10.  

NÁKLON 3/10, 

5/20, 7/30 

In run mode, change the incline to 3 /5 /7. 

In climb mode, change the tilt to 10/20/30. 

PROGRAMS 

QUICK START 

Turn on and insert the safety key. Press START and the treadmill starts at 0.8 km / h after a 3-second 
countdown. You can change the speed and incline as needed.  

MANUAL MODE  

In standby mode, press START, the treadmill will start at 0.8 km / h, all values will be added from 0. 
You can use the SPEED and INCLINE buttons to adjust the speed and incline values. 

In  standby  mode,  press  MODE  to  enter  the  countdown  setting.  The  value  on  the  TIME  display  will 
flash. Use the SPEED and INCLINE buttons to set the value from 5:00 to 99:00. 

Press  MODE  2x  to  set  the  distance  countdown.  The  display  shows  1.00.  Use  the  SPEED  and 
INCLINE buttons to set the value from 0.50 to 99.90. 

Press MODE 3x to set the calorie countdown. The display shows 50.0. Use the SPEED and INCLINE 
buttons to set the value from 10.0 - 999. 

Press START to start the program after setting the values. During exercise, you can adjust the speed 
and incline using the SPEED and INCLINE buttons. Press STOP to stop the treadmill. 

PRESET PROGRAMS  

You can select programs using the quick selection buttons or by selecting in the menu after pressing 
PROGRAM. The TIME display will show the set original value 30:00 which will flash. You can change 
the program run time using the SPEED and INCLINE buttons. Press START to confirm the setting and 

Summary of Contents for IN 24097






























Reviews: