background image

12 

 

 

2. EXERCISE PHASE 

This is the stage  where  you put the effort in. After regular use, the muscles in  your legs  will become 
stronger.  Work  as  you  like  but  it  is  very  important  to  maintain  a  steady  tempo  throughout.  exertion 
should be sufficient to raise your heart beat into the target zone shown on the graph below. 

 

This stage should last for a minimum of 12 minutes although on average it lasts approximately 
15 - 20 minutes. 

1. COOL-DOWN PHASE 

This stage allows your cardio-vascular system and muscles to wind down. This is a repeat of the warm 
up  exercise,  e.g.  reducing  your  tempo  and  continuing  for  approximately  5  minutes.  The  stretching 
exercises should now be repeated, again remember not to force or jerk your muscles into a stretch. 

As you get fitter you may need to train longer and harder. It is advisable to train at least three times a 
week, and if possible space your workouts evenly throughout the week. 

MAINTENANCE 

Reasonable  cleaning/lubricating  should  be  made  to  extend  the  longevity  of  this  unit.  Performance  is 
maximized when the belt and the mat are kept as clean as possible. 

WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE FUNCTION AND LIFE 
OF  YOUR  TREADMILL  AND  THAT  IS  WHY  WE  RECOMMEND  YOU  CONSTANTLY  LUBRICATE 
THIS  FRICTION  POINT  TO  PROLONG  THE  USEFUL  LIFE  OF  YOUR  TREADMILL.  FAILING  TO 
DO THIS MAY VOID YOUR WARRANTY. 

WARNING: Unplug the power cord before maintenance. 

Summary of Contents for IN 13080
























Reviews: