background image

21 

 

5.  E05 display: Over load current protect 

a.  If the the current is too strong, the system will automatically shut down to protect itself. Please 

restart the machine. 

b. 

It’s possible part of the machine is blocked and causing a problem with the moto. Please add 

the oil to the machine and restart. 

c.  Please check if there is bad smell from the motor. If there is, replace the motor. 

d.  Please check if there is bad smell from the driver. If there is, replace the driver. 

TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS 

General Conditions of Warranty and Definition of Terms 

All  Warranty  Conditions  stated  hereunder  determine  Warranty  Coverage  and  Warranty  Claim 
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil 
Code,  Act  No.  513/1991  Coll.,  Commercial  Code,  and  Act  No.  634/1992  Coll.,  Consumer  Protection 
Act, as amended, also in cases that are not specified by these Warranty rules. 

The  seller  is  SEVEN  SPORT  s.r.o.  with  its  registered  office  in  Borivojova  Street  35/878,  Prague 
13000, Company Registration Number: 26847264, registered in the Trade Register at Regional Court 
in Prague, Section C, Insert No. 116888. 

According to valid legal regulations it depends whether the Buyer is the End Customer or not. 

“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not 
conclude and execute the Contract in order to run or promote his own trade or business activities. 

“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the 
purpose  of  using  the  Goods  or  services  for  his  own  business  activities.  The  Buyer  conforms  to  the 
General  Purchase  Agreement  and  business  conditions  to  the  extent  specified  in  the  Commercial 
Code. 

These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement 
made  between  the  Seller  and  the  Buyer.  All  Warranty  Conditions  are  valid  and  binding,  unless 
otherwise  specified  in  the  Purchase  Agreement,  in  the  Amendment  to  this  Contract  or  in  another 
written agreement. 

Warranty Conditions 

Warranty Period 

The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in 
the Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal 
warranty period provided to the Consumer is not affected. 

By  the  Warranty  for  Goods  Quality,  the  Seller  guarantees  that  the  delivered  Goods  shall  be,  for  a 
certain  period  of  time,  suitable  for  regular  or  contracted  use,  and  that  the  Goods  shall  maintain  its 
regular or contracted features. 

The Warranty does not cover defects resulting from: 

 

User’s fault, i.e. product damage caused by unqualified repair work and improper assembly 

 

Improper maintenance 

 

Mechanical damages 

 

Regular use (e.g. wearing out of rubber and plastic parts, joints etc.) 

 

Unavoidable event, natural disaster 

 

Adjustments made by unqualified person 

 

Improper  maintenance,  improper  placement,  damages  caused  by  low  or  high  temperature, 

water, inappropriate pressure, shocks, intentional changes in design or construction etc. 

Summary of Contents for IN 13080
























Reviews: