10
STEP 3: HANDLEBAR POST, HANDLEBAR POST COVER
Remove four M8x15 Bolts (19), four Ø20xØ8x2.0 Washers (14) from the Main Frame (1). Remove bolts with
the S6 Allen Wrench provided.
Slide the Handlebar Post Cover (58) up to the Handlebar Post (7).
Connect the Sensor Wire (69) from the Main Frame (1) to the Extension Sensor Wire (63) from the Handlebar
Post (7).
Insert the Handlebar Post (7) onto the tube of the Main Frame (1) and secure with four M8x15 Bolts (19), four
Ø20xØ8x2.0 Washers (14) that were removed. Tighten bolts with the S6 Allen Wrench provided.
Slide the Handlebar Post Cover (58) down to the Handlebar Post (7).
