11
STEP 4: HANDLEBAR INSTALLATION
Insert the Hand Pulse Sensor Wires (49) into the hole on the Handlebar Post (7) and then pull them out from the
top end of the Handlebar Post (7). Place the Handlebar (8) through clamp on the Handlebar Post (7) with hand
pulse sensors facing the seat.
Hold the Handlebar (8) in desired position and fasten Clamp Cover (56), Ø12x20x1.5 Spacer (57), and
Handlebar T-Knob (64) onto clamp. Tighten the Handlebar T-Knob (64) after adjustment.
NOTE: Handlebar T-Knob should be tightly secured before using.
STEP 5: COMPUTER INSTALLATION
