7
c. Paste a Logo Sticker on the surface of the
Front Decorating Upright Cover (12.)
A logo sticker is
included in the hardware box.
d. Slide the
Upright Sleeve (18)
down to cover the open area of the
Main Frame (1.)
ASSEMBLE INSTRUCTIONS
STEP 6
Connect the
Lower Pulse Sensor Wire
(113)
to the
Middle Pulse Sensor Wire
(112B.)
Remove the
Lock Washer (M8)(78)
and
Bolt, Button Head (M8xp1.25x16mm)
(90)
from the
Upright Post (5).
Insert the
Handlebar (6)
into the
Upright
Post (5)
and secure with the
Lock
Washer (M8)(78)
and
Bolt, Button Head
(M8xp1.25x16mm)(90)
on each side as
the drawing shown.
STEP 7
a.
Loosen the
Screw (M3x10mm)(79)
at the
bottom on the console by using the
combination wrench to open the
Battery
Door (16.)
b. The
Console (13)
operates with FOUR AA
rechargeable batteries, four batteries are
included in the hardware box.
The machine is suitable for
Nickel-Metal Hybrid/NI-MH
rechargeable batteries only.
c.
Install rechargeable batteries into the console.
STEP 8
Attach the
Battery Door (16)
onto the back of the
Console (13)
with the
Screw (M3x10mm)(79.)
STEP 9
a. Connect the
Middle Pulse Sensor Wire (112A)
to the
Middle Pulse Sensor
Wire (112.)
b. Connect the
Middle Connection Wire (109A)
to the
Middle Connection Wire
(109.)
Note the number of wire pin should be the same for both wires to connect with as
the illustration shown on the right.
STEP 10
Place the
Console (13)
onto the
Upright Post (5)
and secure with the
Screw, Round Head
(M5xp0.8x15mm)(83.)
NOTE:
To prevent from any damages, general batteries and other type of batteries are not
allowed.
Summary of Contents for 896 SEG 7020
Page 34: ...34 PRODUCT PARTS DRAWING...
