Insportline 896 SEG 7020, User Manual

Page: 23 / 34

23
COMPUTER OPERATION
a. START/PAUSE
”
button: Press the
“
START/PAUSE
”
button
to pause the current program.
b.
“
RESET
”
button: Hold the
“
RESET
”
button for
FOUR SECONDS to enter into
the initial setting mode as the
illustration shown on the right.
c.
“
PROGRAM
”
button: MANUAL would then flash on the LCD window. Press the
“
PROGRAM
”
button to select
“
PROGRAM MODE
”
. .
d.
“
ENTER
”
button: Press the
“
ENTER
”
button for confirming and entering the function value setting.
e.
“
UP
”
or
“
DOWN
”
button: Press the
“
UP
”
or
“
DOWN
”
button to choose P12 as the following illustration shown.
f.
“
ENTER
”
button: Press the
“
ENTER
”
button to enter Program 12 .
g.
“
UP
”
or
“
DOWN
”
button: Press the
“
UP
”
or
“
DOWN
”
button to choose the desired Watt Control value (40 ~ 400 Watt;
10 Watt increment.)
h.
“
ENTER
”
button: To continue selecting other function values, press the
“
ENTER
”
button.
P12 (WATT CONTROL)
UNDER
PROGRAM
MODE
The RESET function only operates under PAUSE MODE .
NOTE: The console will cycle through the functions as follow and allow users to set the function
values.
TIME (01:00 to 99:00; 1minute increment)

DISTANCE (0.1 to 99.9km; 0.1km increment )

CALORIES (10 to 990 Kcal; 10 Kcal Increment)

PULSE (70 to 240 BPM; 1BPM increment)

Press the
“
ENTER
”
button to confirm the function value and enter the next function value
setting.

To increase or decrease the value of the function (
“
TIME
” , “
DISTANCE
” , “
CALORIES
” ,
“
PULSE
”
,) press the
“
UP
”
or
“
DOWN
”
button.

To reset the function value to zero, press the
“
RESET button.