MAINTENANCE
TREADMILL LUBRICATION
To reduce the friction of the walking belt and minimize wear, lubricant may be applied directly onto the wooden
board and underside of the Tread belt.
Lift one side of the belt and touch the top surface of the Tread board. If the surface is wet no lubrication is
required .If the surface is dry, lift one side of the belt edge first and at the same time spray or apply lubricant to
the board. Make sure to walk on your Treadmill at a slow speed for the first 3-4 minutes of use after applying
lubricant. This helps to distribute the lubricant equally.
NOTE: Do not apply the lubricate over the board. Any excess lubricant should be wiped off.
Lubricant may be applied whenever friction occurs, but it is usually required every 50 hours of use. Please
remember that this is only a guideline based on average Treadmill use, your schedule may vary.
Summary of Contents for 5547 Sprynkl
