7
STEP 3
•
Attach the saddle (33) to the horizontal saddle post (34), then attach the horizontal saddle post
(34) to the saddle post (28) using flat washer (31) and plum nut (32) as shown below.
•
At least insert the saddle post (28) into the main frame (1) and secure with the knob (29) at
proper height.
•
WARNING:
The saddle should be tightly fastened to the horizontal saddle post. Check it
before each workout.
STEP 4
•
Connect the extension wire (13) with sensor wire (11).
•
Put the cable of tension controller (19) into the spring hook of tension cable (12) as shown in
picture A. Then pull the resistance cable of tension controller (19) upward and force into the
gap of metal bracket of the tension cable (12).
•
Check that all the wires are properly connected. Then fix the handlebar post (17) to the post of
the main frame (1) using inner hex bolts (14) and arc washers (6).
