6
NOTE:
Most of the listed assembly hardware has been packaged separately, but some hardware
items have been pre-installed as assembly parts. Because of this, simply remove and reinstall the
hardware as for assembly required. Keep the assembly steps for reference and make note about all
pre-installed hardware parts.
ASSEMBLY STEPS
NOTE:
•
Have enough of free space for safe assembly and use proper tools. Before assembly check
that no part is missing.
•
To increase your safety, ask at least one adult person for help during mounting.
•
Assembly should be done only by adult people.
STEP 1
•
Attach the front stabilizer (2) and rear stabilizer (3) to the main frame (1) with the carriage bolts
(5), arc washers (6) and acorn nuts (7) as shown below.
STEP 2
•
Attach the right and left pedals (9L/R) to the crank (8) respectively.
•
Both pedals are labeled: L-left, R-right
•
To tighten it, turn the left pedal counterclockwise and the right pedal clockwise.
•
WARNING:
Always keep the left and right pedal completely tightened while using this device
to avoid product damage or personal injury.