background image

 

IMPORTANT SAFETY INSTRUCTIONS 

Please read this entire manual and familiarize yourself with all decals and 
warnings before using this Smith Cage System Option-1. 
 
•  WARNING!  It is necessary to inspect this Smith Cage System Option-1 
  regularly to maintain safety and proper function.  Please use the 
  maintenance schedule included towards the back of this manual.  
  Immediately replace any and all defective or worn parts.  Pay special 
  attention to moving  parts.  See General Maintenance section for 
 complete 

details. 

 
•  Use this Smith Cage System Option-1 for its intended purpose as 
  described in this Operation Manual or the exercise chart.  Do not use 
  attachments not recommended by the manufacturer. 
 
•  Make sure bystanders are at least 5 feet away from the Smith Cage 
  System Option-1 while it is in use. 

 

•  Keep children away from the Smith Cage System Option-1 at all times. 
 
•  Keep the Smith Cage System Option-1 away from walls and clear of any 
  obstructions and furniture. 
 
•  Stop immediately if you experience shortness of breath, pain, or 
  dizziness during your workout.  Inspire Fitness strongly recommends 
  consulting your doctor before starting an exercise program. 
 

TOOLS REQUIRED FOR ASSEMBLY 

 
• 9/16” wrench 
•  3 mm Allen wrench – supplied  
 

 
 
 
 
 
 
 

PAGE 1

 

 

Summary of Contents for SCS-1











Reviews: