Inspiration S101 L, Owner'S Manual

Page: 19 / 96

Inspiration Spas 2021 Owner’s Manual
DOC: OM-INSPIRATION-21G
19
Wire Size and Over Current Protection (Canada/US)
Amp rating of spa Supply Wire type and size Over Current
Protection (amps)
More than To 60C copper, AWG 75C copper, AWG
16 20 10 10 25
20 24 10 10 30
24 28 8 10 35
28 32 8 8 40
32 36 6 8 45
36 40 6 8 50
40 48 4 6 60
Note: If your GFCI trips immediately on start-up or during the opening use of the spa, DO NOT USE THE SPA and
take precautions to ensure that no one uses the spa, while you contact your dealer/electrician. GFCI trips on
newly installed spas are predominantly caused by mis-wired GFCIs.
SPECIAL NOTE: DISCONNECT SWITCH
This unit must be connected to a disconnect that de-energizes power to the entire unit for servicing,
maintenance or the like. The disconnect switch, with marked "OFF" position, must be located within sight from
the equipment and at least 5ft. (1.52m) from the inside walls of the spa.
SPECIAL NOTE: EMERGENCY SWITCH
This unit is intended for use in a single family dwelling. When used in locations other than a single family
dwelling, a clearly labelled emergency switch, readily accessible to the occupants and at least 5ft. (1.52m)
away from the unit, shall be provided as part of the installation.
Wire Size and Over Current Protection (Europe)
Total Ampere Rating of
Power System
Minimum Wire Size
Use Copper ONLY
With 90 ° C Insulation
Ampere Rating of
RCD Circuit-breaker
OA to 16A #12 AWG 20
16A to 20A #10 AWG 25
20A to 24A #10 AWG 30
24A to 28A #8 AWG 35
28A to 32A #8 AWG 40