www.insigniaproducts.com
9
3-in-1 TV Stand
STEP 2: Attach the top shelf support to the top panel and spine
You need:
1
Align the top shelf support (
G
) with the center of the top shelf frame (
A
).
2
Place a flat washer (
R
), then a lock washer (
Q
) over the hole in the top of the shelf support and in the two holes on the
bottom of the shelf support.
3
Insert a 5/8" bolt (
M
) through each sets of washers, then tighten the bolts with the 4 mm hex key (
W
).
G
Top shelf support (1)
M
5/8" bolt (3)
W
4 mm hex key (1)
Q
Lock washer (3)
R
Flat washer (3)