www.insigniaproducts.com
17
3-in-1 TV Stand
STEP 2: Attach the swivel bracket assembly to the spine
You need:
1
Place a flat washer (
R
), then lock washer (
Q
) over one of the holes on the side of the swivel bracket.
2
Insert a 5/8" bolt (
M
) through the washers and into the threaded hole on the spine assembly (
F
).
3
Repeat steps 1 through 2 for the five remaining holes.
4
Tighten the bolts with the 4 mm hex key (
W
).
Note:
The upper spine provides four height options for your TV. Based on your TV size, adjust the swivel bracket (H)
to the best height to offer optimum viewing.
W
Hex key 4 mm (1)
Q
Lock washer (6)
R
Flat washer (6)
M
5/8" bolt (6)
The pivot bolt head
is located at the top