manualshive.com logo in svg

Insignia NS-HFTVS3N175, Assembly Manual, Page: 20 / 39

Share
Download
Insignia NS-HFTVS3N175 Assembly Manual Download Page 20

www.insigniaproducts.com

20

STEP 5: Determine whether your TV has a flat back or an irregular or obstructed back or a curved 
screen

1

Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and 
scratches.

2

If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for 
instructions.

3

Lay the TV brackets, oriented vertically, on the back of your TV.

4

Align the screw holes in the TV brackets with the mounting screw holes on your TV. 

5

Identify which type of back your TV has:

•

Flat back: 

The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when 

assembling the wall mount.

•

Obstructed back

: The brackets block one or more of the jacks on the back of your TV. You need spacers when 

assembling the wall mount.

•

Irregularly-shaped back

: There is a gap between a bracket and some part of the back of your TV. You need spacers 

when assembling the wall mount.

6

Remove the TV brackets.

Summary of Contents for NS-HFTVS3N175








































Reviews:

No comments