www.insigniaproducts.com
16
Mounting the TV using the swivel configuration
STEP 1: Attach the swivel bracket to the mounting frame
You need:
1
Align the four mounting holes on the swivel bracket (H) with the holes on the back side of the mounting frame (I). Make
sure that the hex nut on the swivel bracket and the two recessed holes on the mounting frame point in the same
direction.
2
Place a flat washer (
R
), then a lock washer (
Q
) over each of the mounting holes on the back of the swivel bracket (
H
).
3
Insert a 1/2" bolt (
L
) through the washers and into each of the threaded holes on the mounting frame (
I
).
4
Tighten the bolts with the 4 mm hex key (
W
).
Note:
If you are wall-mounting the TV, go to STEP 4: Select the correct bolts, washers, and spacers for your TV on page 19.
Note:
The hex nut and recessed holes point in the same direction.
H
Swivel bracket (1)
I
Mounting frame (1)
W
Hex key 4 mm (1)
Q
Lock washer (
4
)
R
Flat washer (
4
)
L
1/2" bolt (4)
Hex nut
Recessed holes