37
NS-32D311NA15 Insignia 32" LED TV
www.insigniaproducts.com
Use the remote control
Install remote control batteries
1
While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2
Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3
Replace the battery compartment cover.
Aim the remote control
• Point the remote control towards the remote
sensor on the front of your TV. For the location
of the remote sensor, see “
” on page
.
Cautions
• Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
depleted.
• If the remote control is not going to be
used for an extended period of time,
remove the batteries.
