Inseego 5G MiFi M1100, User Manual

Page: 46 / 68

42
Modem
Modem
information includes:
•
Phone number (MDN)
— The Phone Number or Mobile Directory Number (MDN) is used by
the mobile data network to identify this particular data service.
•
MEID
— The Mobile Equipment Identifier (MEID) is used by the mobile data network to
identify this particular modem.
•
IMEI
— The International Mobile Equipment Identity (IMEI) number for the M1100.
•
IMEISV
— The International Mobile Equipment Identity (IMEI) combined with an approval
number for the M1100.
•
FW version
— The modem firmware version.
•
SIM status
— Status of the SIM card. If the SIM card is missing, or this field indicates some
form of SIM error, the M1100 will not be able to connect to the mobile network.
•
ICCID
— The ID number assigned to the SIM Card.
•
MIN (MSID)
— The Mobile Identification Number (MIN) or Mobile Station ID (MSID) is the
number associated with the home service provider and the wireless phone number.
•
ESN
— The Electronic Serial Number, which is either blank or a pseudo-ESN which is not
guaranteed to be unique for devices that use an MEID.
•
Home SID
— System identifier for the home network.
•
ERI version
— The Enhanced Roaming Indicator version that is currently installed.
•
PRL version
— The version of the Preferred Roaming List (PRL), which tells the modem which
non-home carrier towers should provide roaming coverage.
4G LTE Network
The 4G LTE Network section has the following options:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
Network operator
— The vendor that currently provides wireless access.
•
Signal strength
— Indicates the signal strength for LTE.
•
SNR
— A measure of signal quality; the higher the number the better the signal.
Field Test
Click
Field Test
to see a list of low-level network parameters which can be helpful for technical
support staff when they troubleshoot network connectivity issues.
Logs
From the Logs tab, you can turn logs ON/OFF, and to delete system logs.
NOTE
Logs record various operations and are used for troubleshooting and are not needed for normal
M1100 operation.