Inseego 5G MiFi M1100 User Manual Download Page 14

Page: 14 / 68

Replacing the SIM Card

Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores your phone
number and important information about your wireless service.

To remove the SIM card:

➊

Insert your fingernail in the battery removal groove at the top edge of the battery cover,
then lift and remove the cover. Set the cover aside.

➋

Remove the battery from the battery well.

➌

Carefully slide the SIM card backwards to remove from the SIM card slot.

NOTE

Should your SIM card be lost or damaged, contact your network operator.

To install a new SIM card:

➊

Lift to open the battery cover located on the back of the M1100.

➋

If necessary, remove the SIM card from the outer card, being careful not to touch the gold-
colored contacts.

➌

Hold the card with the gold-colored contact points facing down.

➍

Insert the SIM card into the slot. The SIM card MUST remain in the SIM card slot when in use.

CAUTION!

Do not bend or scratch your SIM card. Avoid exposing your SIM card to static

electricity, water, or dirt.

Summary of Contents for 5G MiFi M1100





































































Search results

Summary of Contents for 5G MiFi M1100

Reviews:

Related manuals for 5G MiFi M1100

Brands by name

Popular brands

Inseego 5G MiFi M1100, User Manual

Search results

Summary of Contents for 5G MiFi M1100

Reviews:

Related manuals for 5G MiFi M1100

Brands by name

Popular brands