NVC210
User’s Guide
Rev.1.2 (Aug. 2009)
51
51
51
51 of 56
of 56
of 56
of 56
F-
Move the focus to further position.
Not applicable for NVC210.
A/F
Auto focus.
Not applicable for NVC210.
F+
Move the focus to nearer position.
Not applicable for NVC210.
6.4.
How to Upgrade the NVC210
Unless otherwise instructed, the owners of the NVC210 are recommended to upgrade the system
when upgraded firmware is released using manual upgrade procedure.
Followings are the procedure to apply for the manual upgrade
1)
Save the upgrade system software to your PC. Upgrade software can be downloaded from
Inscape Data’s home page or provided in CD.
2)
Log on to administrative mode and select “Update & Reset” menu.
3) Click "Browse..." to find the files you want to use for upgrade. This will open a "Choose file"
dialogue window. The file extension is “ief”.
4) When you've found the file, click "Open." This will select the file and close the "Choose file"
dialogue window.
5) Click the "INSTALL" button. An alert message box will pop up. Click “OK” button then it will
start uploading the file. This may take some time.
6) Upgrade completion message will appear after the system upgrade has been completed.
7) Reboot NVC210 by performing “System Reset”.
8) After rebooting, log on to the server in administrative mode again and click the “Status
Report”.
9) Check the version number and release date of the NVC210.
10) You can download the most current NVC210 system software from www.inscapedata.com.
