NVC210
User’s Guide
Rev.1.2 (Aug. 2009)
28
28
28
28 of 56
of 56
of 56
of 56
selection.
DC IRIS Lens
DC IRIS lens is a kind of auto IRIS lens. Opening of IRIS can
be adjusted by applying DC voltage. The opening of IRIS is
optimally adjusted by detecting the signal level from CCD. This
type should be selected when DC IRIS lens is mounted on your
NVC210.
ELC
Manual Lens without IRIS control
Backlight
Compensation
When the camera is acquiring video from object with bright
backlight, it is hard to identify the details of target object since
the object appears very dark. Apply backlight compensation
mode for this case. Default mode is backlight compensation
Off.
Auto Gain
Control
If you set the value to ON, the gain is automatically adjusted in
accordance with the illumination condition.
CCD Control
Flickerless
In case of using NTSC type NVC210 in 50Hz AC regions or
using PAL type NVC210 in 60Hz AC region, video output tends
to flicker when NVC210 is used under fluorescent lamps. This
mode reduces the flickering phenomena. If this mode is
selected, electronic shutter speed is set to 1/100 sec for NTSC
camera while it is set to 1/120 for PAL camera to synchronize
the shutter speed to AC current.
<Note> : Make sure that you apply this mode only when using
NTSC camera in PAL region or PAL camera in NTSC region.
AWB
AWC : Apply this mode for normal usage. This mode provides
even color reproduction for wide range of color temperature.
ATW : This mode provides coverage for narrower color
temperature.
Sharpness
Adjust the sharpness of the video
DC level
Adjust the brightness level by adjust this value.
Color Blue
Adjust the amount of blue in the video.
Color Red
Adjust the amount of red in the video
Restore
Original Values
Apply original setting of the values.
SAVE
Click “
SAVE
” to save your selection.
