NVC210
User’s Guide
Rev.1.2 (Aug. 2009)
30
30
30
30 of 56
of 56
of 56
of 56
Administrator
Confirm
Password
Enter the password once more to confirm the password.
Add User
Username
Enter the user ID you want to add. Up to 100 users are
supported by NVC210.
Add User
Password
Enter the user password.
Add User
Attribute
You can set different system resource access capabilities for
each of the users.
Attributes are Audio, Bi-directional Audio and Pan/Tilt
control.
For example, if you want a specified user to hear the
audio from the NVC210, check Audio in the check box.
User List
You can list “user ids” and “ their attributes” here.
format : user id[A, BA, P] :
A – audio,
B – bi-directional audio,
P – pt(Pan/Tilt), attribute.
You can delete specific user by clicking the
DELETE
button.
YES
SAVE
If you want to restrict viewing access to the NVC210, check at
the box left to
Yes
and click on
Save
. Users need to input ID
and password to connect to NVC210 in viewing mode in a pop
up window as shown below..
Figure 5-8. User Authentication in NVC210
Authentication
for Viewing
If No, default
attribute
If you uncheck for the Authentication for Viewing, all users can
access the NVC210 with the same attribute set here. Checked
attributes are enabled. Click “
Save
” to save the attribute.
Current Time
It shows you the current time of NVC210.
Time Setup
Synchronize
Synchronize the time with the internet time server at the right.
