NVC210
User’s Guide
Rev.1.2 (Aug. 2009)
16
16
16
16 of 56
of 56
of 56
of 56
network, you do not need to change the RTSP and HTTP port numbers, unless other IP sharing
devices sit in-between the client and the IP video products. For more detailed information
regarding the use of IP sharing device refer to the document
[Use of Private IP network using
IP-sharing-device]
.
3.2. Connecting to xDSL/Cable Modem
1. Follow through steps 1 to 3 in Section 2.5 to assign IP address and other network parameters to
NVC210.
2. Install NVC210 and connect it to xDSL or Cable modem as in Figure 3-2.
Figure 3-2. Connecting the NVC210 to ADSL Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as
assigning IP address for the case of LAN using IP-installer. To enable the notification of the
changed IP address to the user over e-mail when the IP address is changed in floating IP
environment, you have to assign the e-mail address when user name and password are
input using IP-installer.
(Management server provides a convenient way of
connecting to your network camera under dynamic IP environment. Please refer
to the Application note regarding “Management Server” in the CD.)
②
②
②
②
