INOXPAN Pando GR20, User And Installation Manual

Page: 17 / 40

- 17 -
INOXPAN S.L.
- Once the appliance has been delivered, within 24h, remove the packaging and check that
it is in good state, visually inspecting the general state of the outside. If any anomaly or da-
mage is observed, do not install and immediately inform the dealer or installer within 24h of
reception.
- This hood has been designed for normal domestic use. It must not be used for industrial,
professional, or any other use different from what it has been designed for.
- Pando will not be held liable for consequences or damages resulting from incorrect installa-
tion or misuse of the appliance.
- Do not try to alter any of the characteristics of this appliance, this could be dangerous and
will automatically render the guarantee void.
- It must be possible and accessible for the user to disconnect the appliance from the mains
after installation. The power plug should be easily accessible, if this is not the case, a switch
for electrical disconnection, compliant with electrical installation regulations, must be fitted.
- Take special care when perforating walls or ceilings and ensure that there are no hidden
electrical cables, pipes, metal beams, etc., as perforating them could cause great damage,
short circuits or the transmission of noise and vibrations.
- IMPORTANT: Before connecting the appliance to the mains, make sure the current is first
turned off (differential or circuit breaker on the general electrical panel of the house).
- Hood and conduit installation must comply with regulations on ventilation of closed spaces.
More specifically, the exhausted air must not be led through a conduit that is used for exhau-
sting fumes from other appliances using gas or other fuels (central heating installations, etc.).
- Negative pressure in the premises must not exceed 0.04 mbar. This will allow the hood to
operate in optimum conditions. To achieve this, it is necessary to have a permanent entry of
fresh air to avoid air stagnation, it is recommended to have a ventilation grille for this purpo-
se. Doors and windows are not enough.
EN - SAFETY INSTRUCTIONS