4 Function and Application
- 17 -
4
4.1.1 Main Interface
Main interface: used to monitor signals. The interface is as below:
Figure 4-2 Main interface
Inverter
01 Running frequency
0.00 Hz
02 Frequency reference
50.00 Hz
03 Bus voltage
298.6 V
Menu
18:10:21
Loc
Stop
Dev
Current control device
Device status
Device
Menu
Local\Remote
●
Current device name: to display the name of the device currently controlled by the MDKE9
●
Device status/fault information: to display the current running status of the device When the device fails
, the device shall flash display the fault information, running state shall not be displayed then.
●
Device list: List of devices connected to the network
●
Menu: to enter the function menus of the MDKE9
At main interface, you can monitor the monitoring equipment status, such as speed, torque, power. The
main interface has one or more pages, and each page can display up to three signals by turning up and
down the key.
Figure 4-3 Main interface view method
Inverter
04 Output voltage
211 V
05 Output current
0.00 A
06 DI input status
0x0000
Dev
Menu
18:00:02
Loc
Stop
01 Running frequency
0.00 Hz
02 Frequency reference
50.00 Hz
03 DC Bus
298.6 V
18:10:21
Inverter
Stop
Dev
Loc
Menu
Note
Power-on default display “figure 4-2 main interface” At other pages, the device shall
automatically return to the home page view display if there is no operating for more
than 10 minutes.