42
equal to “0”, it indicates the DC brake process does not exist and the inverter stops according to the
setup acceleration stop process.
Example:
Output frequency
Output voltage
RMS value
Running command
Brake initial frequency at stop
Brake waiting time at stop
DC brake quantity
Brake Time at Stop
Output frequency
Output voltage
RMS value
Running command
Brake initial frequency at stop
Brake waiting time at stop
DC brake quantity
Brake Time at Stop
Fig.6-4 DC brake time at stop
F4-04
Brake utility ratio
Default 100%
Setting range
0% to 100%
This parameter is valid for the inverter with built-in brake unit. It can regulate the dynamic braking
effect.