Inova SV 125, Operating Manual

Page: 34 / 392

Safety regulations
SV 125
4016589
1--14
Version 1.0
DANGER!
The compressed air supply disconnecting device disconnects the com-
pressed air energy required for machine operation and releases the
compressed air.
The machine is vented.
When the compressed air supply disconnecting device is turned off,
hazardous pneumatic pressure might still be present.
Works on the compressed air supply must only be performed by quali-
fied personnel.
When working in the machine subframe risk of injury from sharp edges and corners!
Comply with the time schedule and procedures for maintenance and servicing in-
dicated in the operating manual!
Always check the operability of the safety and protective devices after work has
been performed on the machine.
When replacing large--sized subassemblies fasten and secure them carefully to
hoists.
Attach a danger sign prohibiting it from being switched back on.
Use only original spare parts of the manufacturer.
The installation of other parts can lead to hazards. This excludes any liability of the
manufacturer.
1.5.1 Constructional changes to the machine
Do not carry out any modifications, attachments or conversions to the machine
without the authorization of the manufacturer. This also applies to welding to be
performed on load--bearing elements.
All conversion measures require authorization in writing from OPTIMA GROUP
pharma.
Replace immediately any machine parts that are not in perfect condition.
Use only original OPTIMA GROUP pharma spare parts and wear parts.
If parts are obtained from elsewhere, there is no guarantee that they are designed
and manufactured to meet the load and safety requirements.