19
6.0 User Setup Instructions
1. Connect the inoRAC to an adequate power supply via the receptacle on the
side of the control enclosure.
2. Turn on the inoRAC by placing the ON/OFF switch on the side of the control
enclosure into the “ON” position.
3. Start the inoRAC by pressing the “Racking Unit Control” button on the Operator
Panel.
4. Ensure the inoRAC is not connected to a circuit breaker. Ensure the inoRAC
is free to operate all accessories. Follow the Operator Panel instructions for
calibrating the inoRAC.
5. Select the operation to be performed, “Setup” on the Operator Panel.
6. A Logon screen will appear. You must have administrative rights to log into the
unit.
Warning
: Altering Breaker Profile Parameters may cause damage to your
equipment.
7. Re-select the operation to be performed, “Setup” on the Operator Panel.
8. Press the text on the respective button to edit the text. An editor will appear.
Type the desired text via the on screen keyboard. Hit the return key to accept.
a. The labels for each of the eleven screens can be changed.
9. Press the number next to the respective button to edit the pointer. An editor
will appear. Type the desired number via the on screen keyboard. Hit the
return key to accept.
a. This number is the pointer to the specific breaker profile in the master
breaker list. Contact inoLECT for the pointer for your specific
breakers.
b. Improper pointers will likely result in improper and unsafe breaker
racking operation.
10. Press the “OK”, and “NO” buttons to show or not show the respective button.
11. Follow the on screen instructions for saving the user setup.
