14
4.0 UPS/Battery Equipped Racking Instructions
Using a Remote Racking Unit Equipped with a Battery Power System
1. To Power ‘ON’:
Press and hold the power toggle switch unit you hear a short beep. The
indicator light should turn RED
.
2. To Power ‘OFF’:
3. Press and hold the power toggle switch until you hear a short beep. The
indicator light should go out.
4. To Charge the Battery:
a. When the battery needs to be charged, the unit will make a continuous
beeping sound. Plug in the unit to a power source using the standard
power receptacle, located by the ‘ON/OFF’ switch. Leave the unit
plugged in to recharge the battery. Battery will charge when powered
‘ON’ or ‘OFF’.
5. A periodic ‘beep’ will sound if the unit is running on battery power
6. A continuous ‘beep’ means the unit’s battery is low and needs to be charged.
(See steps 3 and 4 above).
7. Leave the unit turned off and plugged into an adequate power supply while
being stored.
