Innovative NV9, Operation Manual

Page: 9 / 41

Copyright Innovative Technology Ltd 2008 GA326-6
:
LED Status
Description
Slow flashing GREEN led Heartbeat
(Slow = 1 second period)
In normal RUN operation, when the NV9 is
ready to read a note, the green status led will
flash slowly ("Heartbeat") to signal a
“healthy” status.
On Start Up - Flashing RED one
second period
During operation - Flashing RED
NV9 ha Error
somew
one second period.
Firmware fail
s a Transportation
here in the note path
On Start Up - Fast flashing RED
(fast = half second period)
g operation - Fast flas Durin hing
Dataset fail
N
may be blocked RED (fast = half second period)
V9 cannot calibrate, sensor(s)
Permanent RED Memory has been corrupted
Flashing AMBER and bezel lights Power cation supply is incorrect, check specifi
Alternating RED and GREEN Either a safe jam or Cash box full
Table 4 – LED S
5 INTE
e of the unit; it has 16 pins (see figure 3)
or the 0V and +12V power supply and
ere are five outputs and five inputs, the remaining four pins are reserved for factory use and
5.1 INTERFACE CONNECTOR PIN DETAILS
e connector pin details are de y use an IDC 16-pin 0.1" pitch
tatus Code
RFACES: HARDWARE DESCRIPTION
The NV9 interface connector is located on the left sid
refer to Table 3 for the pin allocation. Two are used f
th
should not be connected. An example mating connector is Molex type Part No: 39-51-2160
(Note: When assembling own cables ensure the Moulding pin-out below is followed)
Figure 3 - Interface Connector
scribed below (see table 5); the Th
header with 2 rows of 8 pins.
NV9 Operations Manual 9
The Pin allocation is described in
Table 3 below.
Interface Connector